Victron Inverter Charger 8000VA 48Volt twin (2) Smartsolar 150/70Amp Charger Controller
Complete Pre-wired Off Grid/Hybrid system simply add up to 10kw of solar panels and batteries.
Custom Made By Our CEC Qualified Off Grid Installers
Off Grid complete system will take up to 10kw of solar panels nb: output of the charger will go to 6.7 kW. A 15 amp pre-wired generator input so it's as simple as plugging in a generator.
Details On The Victron Equipment
The Quattro is a powerful top end model true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure. 8000VA 48 volt 120 amp battery charger.
Unique PowerAssist Feature
The Quattro will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
Two AC Inputs & two AC Outputs
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
Uninterrupted AC Power (UPS Function)
In the event of a grid failure or shore or generator power being disconnected, the inverter within the Multi is automatically activated and takes over the supply of the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
The Smartsolar MPPT Charge Controller features:
Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android
smartphones, tablets or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an Ultra-fast MPPT controller will improve the energy harvest by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection In Case Of Partial Shading Conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT's tend to lock onto a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding Conversion Efficiency
Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Flexible Charge Algorithm
• Several preconfigured algorithms
• One user programmable algorithm
• Manual or automatic equalization
• Battery temperature system
• Battery Voltage sense option
Programmable Auxiliary Relay
For alarm or generator start purposes
Extensive Electronic Protection
Over-temperature protection and power derating when the temperature is high. PV short circuit and PV reverse polarity protection. PV reverse circuit protection.
Not supplied see other listings
Electrical Safety: Some Electrical Knowledge is assumed. If you are not familiar with DC high current circuits, you should not attempt to wire up any of these components. Employ a CEC certified off-grid solar installer to install these products for you. Energy Connections takes no responsibility for damage caused to equipment or persons as a result of improper installation with these, or any devices sold by us.