PRODUCT CODE : ORI303050000
DC-DC Converter For Charging A 12V Or A 24V Service Battery In Vehicles With A Smart Alternator (Regenerative Braking, Euro 5 And Euro 6 Engines)
The Buck-Boost DC/DC converter is a DC/DC converter for charging a 12V or 24V service battery in vehicles with a smart alternator. The converter will charge the auxiliary battery with a pre-set charge voltage, eliminating high voltages (e.g. Mercedes: 15.4V) and low voltages.
'Engine Running' Detection System
Deep discharge of the vehicle's starting battery is avoided by a built-in 'engine running' detection system. Instead of this detection system, the converter can also be activated by means of a programmable input (D+ CAN Bus or (+) 15 connection).
The converter can be fully programmed by means of a simple and user-friendly PC application. ( USB type A male to USB type B male cable needed).
One Product For 12V, 24V And 12/24V Systems
The converter can be programmed to charge a 12 Volt or a 24 Volt auxiliary battery from either a 12V or a 24V alternator and starter battery.
Charge Current And Input Current Limiter
The output current is determined by the following factors:
• The maximum charge current setting
• The maximum input current setting
• The maximum operating temperature limit of the converter
Input Status Indication (LED)
Green: converter on.
Yellow: input voltage below the threshold, converter off.
Red: Over temperature, converter off.
Blue, quick flash: engine running, the converter will start after a preset delay.
Blue, slow flash: the converter is OFF and activation is blocked due to the low input voltage.
Output Status Indication (LED)
Green: converter off, battery voltage normal.
Yellow: converter off, battery voltage low.
Red: converter off, battery discharged or not connected.
Purple: Converter on.
Dimensions: 213mm (H) x 120mm (W) x 30mm (D)