Standard 230V Model Product Code: SDTG2401001
3-Phase 400V Model product Code: STG024100300
GL Approved 120-240V Model Product Code: SDTG2401003
Perfect Chargers For Any Type Of Battery
Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance free batteries must be charged correctly in order to ensure a long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.
Suitable For AC And DC Supply (AC-DC And DC-DC Operation)
Except for the 3 phase input models, the chargers also accept a DC supply.
Also Available In GL Approved 120-240V Model
Universal 90-265 V AC input voltage range and also suitable for DC supply All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. The chargers will also accept a 90-400 V DC supply.
Germanischer Lloyd approval The Chargers have been approved by Germanischer Lloyd (GL) to environmental category C, EMC 1. Category C applies to equipment protected from the weather. EMC 1 applies to conducted and radiated emission limits for equipment installed on the bridge of a ship. The approval to GL C, EMC1 implies that the Chargers also complies to IEC 60945-2002, category ‘protected’ and ‘equipment installed on the bridge of a ship’. The GL certification applies to 185-265 V AC supply
Controlled Charging
Every TG charger has a microprocessor, which accurately controls the charging in three steps. The charging process takes place in accordance with the IUoUo characteristic and charges more rapidly than other processes.
Use Of TG Chargers As A Power Supply
As a result of the perfectly stabilized output voltage, a TG charger can be used as a power supply if batteries or large buffer capacitors are not available.
Two Outputs To Charge 2 Battery Banks (24V models only)
The TG chargers feature 2 isolated outputs. The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended to top up a starter battery.
To Increase Battery Life: Temperature Compensation
Every Skylla TG charger comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed batteries which otherwise might be overcharged and dry out due to venting.
Battery Voltage Sense
In order to compensate for voltage loss due to cable resistance, TG chargers are provided with a voltage sense facility so that the battery always receives the correct charge voltage.
Enclosure
Material & Colour: Aluminium (Blue RAL 5012)
Battery connection: M8 studs
230V AC connection: Screw-clamp 2.5mm² (AWG 6)
Protection category: IP21
Weight: 10kg, 3 phase model: 23kg
Dimensions: 365mm (H) x 250mm (W) x 257mm (D). 3 phase model: 515 x 260 x 265